Off Road Unlimited 60008 2007 GM 1500 Truck, Tahoe, & Yukon Leveling Kit - Manual (Page 8)

ORU- 2007 GM 1500 Truck, Tahoe, & Yukon Leveling Kit
14) Now it is necessary to rotate the coilover body 180 degrees to correct the angle of the
lower mounting bar pin and allow the bolts to be easily re-installed. This is accomplished
by raising the lower control arm with a jack to provide access to the lower shock body,
applying a penetrating lubricant such as WD-40 and rotating the body with a large pair or
channel locks or other suitable tool (photos 10 & 11).
Photo 10
Photo 11
15) Lower the control arm and install the lower mounting bolts. Tighten the upper stud flange
nuts.
16) Re-attach upper ball joint and the tie rod end and tighten.
17) Repeat steps on passenger side of vehicle. Re-attach sway bar links, re-check all
fasteners for tightness, and have vehicle professionally aligned.
offroadunlimited.com
page 7