Off Road Unlimited 60008 2007 GM 1500 Truck, Tahoe, & Yukon Leveling Kit User Manual
Page 3
ORU- 2007 GM 1500 Truck, Tahoe, & Yukon Leveling Kit
INSTALLATION NOTES:
• Inspect the contents of the kit and read the entire instructions before proceeding.
• We recommend this installation be performed by a qualified technician.
• Torque all hardware to factory specifications.
• We recommend using red Loctite on all bolts.
• When removing wheels, support vehicle with jack stands.
• Unless otherwise noted, installation begins with driver side of vehicle and is then
repeated on passenger side.
1) On a flat surface, block the rear wheels, raise the driver side front of the
vehicle, support with a jack stand and remove the wheel.
2) Disconnect the sway bar links on both sides (photo 1).
Photo 1
3) If vehicle is equipped with Autoride, disconnect wires from top of shocks and brackets
from control arms.
offroadunlimited.com
page 2