JLG 544D-10 Operator Manual - Manual (Page 92)

Section 5 - Attachments
5-30 31200172
Fork Mounted Hook (Before S/N 0160037689)
Description P/N
Fork Mounted Hook ...................................................... 90553036
Fork Mounted Hook ...................................................... 91565094
Use Appropriate Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-3.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The tilt lever (2) controls the fork mounted hook tilt.
• Move lever back to tilt up.
• Move lever forward to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-11.
• Secure the fork mounted hook to the forks by sliding the fork mounted hook onto
the parent forks and install the retaining pin behind the vertical shank of the fork.
OY0640
OX0261
2-FRONT 2-FRONT
2
1