Gradall 534B (9103-1148) Operation Manual - Manual (Page 21)

Capacities**
Application Symbol When Used Grade Specifications English Liters
Recommended Lubricants & Capacities
Engine Crankcase
Engine Cooling System
Transmission
Fuel Tank
Hydraulic System
Differential
Front Planetary Hubs
Rear Planetary Hubs
Boom Bearing Paths
Grease Fitting
Brake master Cylinder
EO (engine oil)
50% water/50% anti-freeze
ATF (automatic trans. fluid)
DF (diesel fuel)
HF (Hydraulic fluid)
GO ( multi-purpose lubricant)
GO ( multi-purpose lubricant)
GO ( multi-purpose lubricant)
CG (ectreme pressure lube)
CG (ectreme pressure lube)
BF (brake fluid)
All year
All year
All year
All year
All year
All year
All year
All year
All year
All year
All year
10W-30
Permanent
-
#2
-
EP 80-90
EP 80-90
EP 80-90
EP2
EP2
-
-
-
ATF-FM DEXRON
-
A.S.L.E. No. H-215*
A.P.I. GL-5
A.P.I. GL-5
A.P.I. GL-5
H-152
H-152
Type A-SAE J-1730C
*Specific hydraulic fluid specifications are shown below.
**Capacities are approximate - check level to be sure.
Hydraulic Fluid Specifications:
Grade, ASTM 215 Viscosity: Carbon Residue, Rams, wt% 0.4
Grade, AGMA 1 SUS at 100° F 215 Zinc, wt% 0.08
Gravity, °API 31.0 SUS at 210° F 48.0 Rust Test. ASTM D 665 A&B Pass
Color, ASTM 2.0 Viscosity Index 105 Oxidation Test. ASTM D 943.
Flash Point, COC, °F 440 Aniline Point, °F 222 hours to Neut. No of 2.0 2500
Fire Point, COC, °F 490 Foam Test, ASTM Pass Emulstion Test, ASTM D 1401,
Pour Point, °F -30 Neutralization Number 1.4 minutes to pass at 130° F 10
Copper Corrosion, 3 hr at 212° F 1B
Tire Specifications
Standard: 13:00 x 24 - 12 ply rating - 55 psi
Optional for front only: 15:50 x 25 - 12 ply rating - 55 psi
Model 534B-8 (8000 pound rating) must have tires filled to 90% of capacity with calcium chloride mixture (49 gallons of
water and 245 pounds of calcium chloride per tire).
12 quarts
24 quarts
20 quarts
40gallons
40 gallons
8 quarts
2.5 quarts
44 ounces
-
-
-
7.8
22.7
18.9
151.4
151.4
8.4
1.3
1.5
-
-
-
2 0