Hale SMD - Manual (Page 2)

ECO NO REV CHANGED FROM BY DATE APVD
04-229 A RELEASED LwH 09/28/2004 MAL
HALE PRODUCTS, INC.
A Unit of IDEX Corporation
Conshohocken, PA 19428 USA
DRAWN BY: LwH ISSUE DATE:
CHECKED BY: PRW 09/28/2004
COPYRIGHT ©
NOT TO BE REPRODUCED OR USED TO
MAKE OTHER DRAWINGS OR MACHINERY
Manual p/n: 029-0020-77-0-A
Printed in U.S.A. © Hale Products, Inc. 2004
All Rights Reserved
NOTICE !
Hale Products cannot assume responsibility for product failure resulting from improper
maintenance or operation. Hale Products is responsible only to the limits stated in the
product warranty. Product specifications contained in this manual are subject to change
without notice.
All Hale products are quality components -- ruggedly designed, accurately machined,
precision inspected, carefully assembled and thoroughly tested. In order to maintain the
high quality of your unit, and to keep it in a ready condition, it is important to follow
the instructions on care and operation. Proper use and good preventive maintenance
will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN YOUR
CORRESPONDENCE.