Buffalo Technology WHR-G300N - Manual (Page 16)

1
You can get to this page by selecting the
Wireless Config category and choosing the
AOSS submenu.
The blue AOSS button at the top left of the
page has the same function as the physical
AOSS button on the top of the router: it
initiates the AOSS process.
If all your clients support AOSS, it’s very
simple to set them up. Press the AOSS
AOSS
button on the router, or the one on this page, and then push the AOSS button on the client
device.
Each client device will have to be set up separately. Wait for each AOSS process to finish
before starting the next one.
You can also activate AOSS by pushing the button on the top of your AirStation (see page
16). Consult your client device’s documentation for the location of its AOSS button.
If you’ve used AOSS to configure some wireless clients, and now want to add other wireless
clients that don’t support AOSS to your network, this screen will give you the information
you need to connect them manually.