beautypg.com

Behringer V-AMPIRE LX210 User Manual

Page 9

background image

9

V-AMPIRE LX1200H/LX210

3.2.2 LX210

You can connect both speaker outputs to an external stereo

speaker arrangement, e.g. our BG412S. In this configuration the

V-AMPIRE also delivers 2 x 60 W into 8 Ω per side (fig. 3.3).

Fig. 3.3: Operation with external 2 x 8

stereo box

Alternatively, just one external 8 Ω speaker may be connected

to the right or left speaker output. This also represents a stereo

configuration, because just the corresponding internal speaker

is muted, the other one is still active (fig. 3.4).

Fig. 3.4: Stereo operation with external 4

box

and internal speaker

3.3 Rehearsal or recording at home

(LX1200H und LX210)

When using headphones, the V-AMPIRE will switch into studio

mode 1 (S1). This mode is particularly suitable for rehearsals or

when recording/monitoring. You could also use live mode 1 (L1)

which applies an additional 3-band EQ.

+

When connecting headphones, the amp signal is

automatically muted. Thus, if you unplug the

headphones we strongly recommend to turn the

MASTER control to the very left. The XLR output is

independent of the MASTER control setting. This

allows to tap into a line signal for recording

purposes, even when MASTER control is set to

minimum.

Using studio mode 2 (S2) at home can be a good idea when it

comes to recording an amp sound without effects (“dry”) but

monitoring it with effects (“wet”). Working this way, you are

able to choose the effects you want later during mixdown. In

this case you would route the left output to the soundcard of

your computer and monitor the right output via your mixing console.

Figure 3.5 shows a typical home/rehearsal room application.

Fig. 3.5: Standard home/rehearsal setup

One advantage of rehearsing at home is that there is often a

computer available which allows you to design, edit, send, receive

and archive new presets comfortably and effectively. Download

our V-AMP DESIGN software free of charge at www.v-amp.com.

You can create your own presets even with minimum system

requirements (Windows PC with MIDI interface or gameport MIDI

adapter). On the V-AMP homepage you also find an online preset

database (ULI, user library interface) with plenty of presets created

by other V-AMP users and famous artists. Here, you can upload

your own favorite presets and make them accessible for other

users.

3. OPERATING MODES AND EXAMPLES

This manual is related to the following products: