Blaupunkt CM147 - Manual (Page 12)

12
Specifications
Audio Power Specifications
Power Output and Total Harmonic Distortion: 13.5 watts per channel minimum continuous average
output into 4 ohms, 4 channels driven, from 30-15,000 Hz with no more than 1% total harmonic
distortion.
Other Specifications
Tuner
FM
Tuning Range:
87.5 - 107.9 MHz
Intermediate Frequency: 10.7 MHz
FM Mono Sensitivity: 13 dBf
Seek lo sensitivity: 51 dBf
Seek sensitivity 31 dBf
Selectivity: 80 dB at 400kHz
Signal-to-Noise Ratio: 65 dB (stereo), 70 dB (mono)
Harmonic distortion at 1 kHz: 0.7% (stereo), 0.5% (mono)
Separation: 30 dB
Frequency Response: 30-15,000 Hz ± 3 dB
AM
Tuning Range:
530 - 1,710 kHz
Seek LO (Local) sensitivity 50 dB µ V
Seek DX (Distant) sensitivity: 25 dB µ V
Intermediate Frequency: 450 kHz
Signal-to-Noise Ratio: 50 dB
Frequency Response: 30-5,000 Hz + 3dB
Cassette
Signal-to-Noise Ratio: 55 dB
Tape Wow and Flutter: 0.10% dB
Tape Frequency Response: 30-18,000 Hz
±
3 dB
Audio
Speaker Impedance: 4-8 ohms
Maximum Amp Power: 4 X 35 Watts (at 4 ohms)
RMS Power: 4 X 13.5 Watts (at 4 ohms) <1% THD
Bass Control: ± 10 dB @ 100 Hz
Treble Control: ± 10 dB @ 10 kHz
Loud1: + 8 dB @ 60 Hz & + 2 dB @ 8 kHz
Loud2: + 12 dB @ 60Hz & + 4 dB @ 8 khz
Preamp Outputs: 4-Channel, Low-Impendance (200 Ω ) Preamplifier
Preamp Output Voltage: Over 3 Volts of Distortion-Free Preamp Output
General
Dimensions (w/o projecting parts/controls): 180 x 50 x 155 mm
7 x 2 x 6
1 / 8 in.
Mass: Approx. 1.4 kg (3.0 lb.)
Power Requirement (neg. grnd.): 12 V DC car battery (11-16 V DC allowable)
Operating Temperature: 15
°
F to 120
°
F, –10
°
C to 50
°
C
Supplied Accessories: • Unit
• Faceplate
• Wire Harness, including 2-Channel RCA Preamp Output
Harness
• DIN Sleeve
• Mounting Hardware
• Owner’s Manual in English, French, Spanish and Portuguese
Optional Accessories: • CDC-A05 or A071 CD Changer
• 4-Channel Preamp Output Harness-Part No. 8634494218
(Harness Available in USA at 1-800-920-2121)
Design and specifications subject to change without notice.