Philips VR674CAT99 - Manual (Page 40)

POWER
EJECT
SPEED VCR/TV
VCR TV
CBL
/DBS
SLOW X2 PLAY F.ADV
TIME INDEX REC END SKIP
MEMORY
1 2 3
4 5 6
7 8 9
0
CH. VOL.
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
VCR PLUS+
/ENTER
SEARCH
VAR.SLOW
MENU
STATUS
/EXIT
SMART
PICTURE CLEAR
VCR PLUS+ PROG.
PLUS CODE : – – – – – – – –
TO END PUSH EXIT
2
Press the VCR PLUS+/ENTER button.
3
Press the Number buttons to enter the PlusCode pro-
gramming number of the program you wish to record.
Then, press the VCR PLUS+/ENTER button.
VCR PLUS+ PROG.
PLUS CODE : 13285 – – –
TO SET PUSH VCR+
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
4
Press the PLAY/o button or the STOP/p button to select
a ONCE, DAILY, or WEEKLY recording. Then, press the
F.FWD/B button.
● ONCE: The VCR will record the selected program once.
● DAILY: The VCR will record the same program every day from
Monday to Friday.
● WEEKLY: The VCR will record the same program once a
week, for example every Tuesday.
• CODE ERROR may flash on the
screen after step 3 if you enter an
incorrect PlusCode programming num-
ber (for example, one that is too
short). The previous screen will
appear. Enter the correct PlusCode
programming number.
• If CLASH flashes on the screen after
step 3, the timer recording you just
programmed and another timer
recording overlap. The current timer
recording will not occur.
• If you select DAILY at step 4, ERROR
may flash on the screen if the pro-
gram you want to record is broadcast
on a Saturday or Sunday. You must
select ONCE or WEEKLY instead.
Helpful Hints
VCR PLUS+ PROG.
→ ONCE
DAILY
WEEKLY
SELECT op CHOOSE B
TO END PUSH EXIT
1
Press the VCR button.
4
1
3
2
40 Timer Recording with the VCR Plus+ Programming System
Follow these steps to set a timer recording with the PlusCode
programming numbers in your TV guide. Before you begin:
● Set up the channels at the VCR. Details are on page 12.
● Set up the VCR Plus+ and Cable/TV channel numbers. Details
are on pages 38-39.
● Set the clock. Details are on pages 16-20.
● Put a tape in the VCR.
● Make sure the VCR light appears on the display panel. If it does
not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.