Philips AD348-37 - Manual (Page 8)

8 EN
5 Specifications
Amplifier
Rated output Power 2 x 4 W RMS
Signal to Noise Ratio > 62 dB
General information
AC Power Model: AS110-080-
AA130 (Philips);
Input: 100-240 V ~,
50/60Hz, 0.5A;
Output: 8.0V 1.3A
Operation Power
Consumption 15 W
Standby Power
Consumption <1 W
Dimensions
- Main Unit
(W x H x D) 265x 94 x 74mm
Weight
- Main Unit
- With Packing
0.9 kg
1.4 kg
6 Troubleshooting
Warning
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site
(www.philips.com/support). When you contact
Philips, ensure that the apparatus is nearby
and the model number and serial number are
available.
No power
• Ensure that the AC power adaptor of the
unit is connected properly.
• Ensure that there is power at the AC
outlet.
No sound
• Adjust the volume.
No response from the unit
• Disconnect and reconnect the AC power
adaptor, then turn on the unit again.