Philips FWD798-37 - Manual (Page 23)

23
English
Preparations
Step 5: Setting language
preference
You can select your preferred language settings
so that this DVD Mini Hi-Fi System will
automatically switch to the language for you
whenever you load a disc. If the language
selected is not available on the disc, the language
set by default will be used instead. But the menu
language of the DVD Mini Hi-Fi System cannot
be changed once selected.
PBC
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select icon and press 4.
3
Press
1 / ¡ / 5 / 4 keys on the remote
control to select your preferred option.
➜ Move to and press ¡.
➜ Move to one of the following and press ¡.
– Audio (disc’s soundtrack)
– Subtitle (disc’s subtitles)
– Disc Menu (on screen menu)
– Divx (R) VOD
4
Press
5 / 4 to select a language and press OK.
5
Repeat steps 3~4 for other settings.
To remove the menu
Press SYSTEM MENU.
Step 4: Setting speakers
IMPORTANT!
– This function is only available when
you have connected other 3.1-channel
speakers.
You can adjust the delay time (center and rear
only) for individual speakers to optimize the
sound effect according to your surroundings and
setup. Speaker settings are only active in the case
of Multi-channel audio output.
PBC
1
5
34 2
1
In disc mode, press SYSTEM MENU.
2
Select icon and press 4.
3
Press 1 / ¡ / 5 / 4 keys on the remote
control to select your preferred option.
➜ Move to and press ¡.
➜ Move to “CENTER DELAY” or “REAR
DELAY” and press
¡.
4
Press
¡ to set CENTER DELAY or REAR
DELAY values you want.
➜ Use longer delay time if the surround
speakers are closer to the listener than the front
speakers.
5
Press OK to confirm.
To remove the menu
Press SYSTEM MENU.
p001-025-FWD798_37_EngA 2006.5.22, 3:36 PM 23