Philips FWD798-37 - Manual (Page 15)

15
English
Connections
Step 4: Connecting FM/AM
antennas
●
Connect the supplied AM loop antenna to the
MW (AM) jack. Place the AM loop antenna on
a shelf or attach it to a stand or wall.
● Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its end to
the wall.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
your TV set, VCR or other radiation sources to
prevent unwanted interference.
Step 5: Connecting the power
cord
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
On the DVD Mini Hi-Fi System
“ AUTO INSTALL-PRESS PLAY” may appear
on the display panel. Press 2; on the front panel
to search and store all available radio stations or
press
9 to exit (See “Tuner Operations-
Presetting radio stations”).
p001-025-FWD798_37_EngA 2006.5.22, 3:36 PM 15