beautypg.com

5 play, Play from usb, Turn on – Philips HSB2313A-F7 User Manual

Page 15: Set clock, Enable easylink

background image

13

5 Play

Play from USB

Note

Ensure that the USB device contains playable

music. (see ‘USB playability information’ on

page 16 )

1

Flip open the cover on the front panel.

2

Insert the USB plug of a USB device into the

jack.

3

Press

USB to select the USB source.

The total number of tracks is displayed.

»

4

Press

ALB/PRESET / to select a folder.

5

Press

/ to select a fi le.

6

Press

to start play.

During play, press and hold

or

to search fast backward or forward.
Press

to pause or resume play.

Repeat play

1

During play, press REPEAT repeatedly to

select:

»

[REPEAT] (repeat): play the current track

repeatedly.

»

[REPEAT ALL] (repeat all): play all tracks

repeatedly.

2

To return to normal play, press REPEAT

until the selected function is no longer

displayed.

Turn on

1

Press

.

The unit switches to the last selected

»

source.

To switch to standby mode:

1

Press

.

The clock (if set) is displayed.

»

To switch to Eco Power Standby mode:

1

Press

for over 3 seconds.

The backlight on the display panel turns

»

off.
The blue Eco Power indicator lights up.

»

Set clock

1

In the standby mode, press and hold

CLOCK to enter the clock setting mode.

»

Clock is displayed and the hour digits

begin to blink.

2

Press

+ VOL - to set the hour.

3

Press

CLOCK to confi rm

The minute digits begin to blink.

»

4

Press

+ VOL - to set the minute.

5

Press

CLOCK to confi rm the clock setting.

Enable Easylink

EasyLink uses the HDMI CEC (Consumer Electronics

Control) industry standard protocol to share

functionality with all HDMI CEC compliant devices

over HDMI. It enables the connected devices to

control each other with a single remote control.

Note

EasyLink (HDMI CEC) is only applicable with

certain criteria. Terms and conditions may vary

by product. Consult your product dealer for

information.

Philips does not guarantee 100%

interoperability with all HDMI CEC devices.

1

Press

SETUP for over 3 seconds.

‘Easylink On’ is displayed.

»

To disable Easylink, press and hold

»

SETUP

until ‘Easylink Off ’ is displayed.

English

EN