Black Box MD403A - Manual (Page 15)

14
PORTABLE USB MODEM QUICK START GUIDE
3. Installation
3.1 Step 1: Connecting the Modem to Your System
3.1.1 USB C ONNECTION
Plug the USB cable connector on the Portable USB Modem into a USB port
connector on your computer.
3.1.2 L
INE
C
ONNECTION
Plug one end of the phone cable into the Portable USB Modem’s LINE jack and
the other end into a phone line wall jack.
NOTE
The Federal Communications Commission (FCC) and Industry Canada
impose certain restrictions on equipment connected to public telephone
systems. See pages 1–3 for more information.
3.2 Step 2: Installing the Modem
The Portable USB Modem is compatible with Windows ® 2000, Windows Me, and
Windows 98.
3.2.1 I
NSTALLATION IN
W
INDOWS
2000
1. Power up your Windows 2000 system.
2. If you have not already done so, connect a) the modem to your computer’s
USB port and b) the telephone line to your modem and a telephone wall
jack.
3. Windows will detect that the new modem is present and indicate that it’s in
the process of installing. The Welcome screen of the Found New Hardware
Wizard
appears first. Click Next >.
4. The Install Hardware Device Drivers screen appears, indicating that the
wizard will install the hardware device drivers. Verify that “Search for a
suitable driver for my device (recommended)” is selected, and click Next >.