Philips VR960BPH - Manual (Page 23)

AUDIO OUT Jacks
Connect audio cables going to the AUDIO IN jacks of a
camcorder, another VCR, or an audio system here. Details are on
pages 48 and 55.
AUDIO IN Jacks
Connect audio cables coming from the AUDIO OUT jacks of a
camcorder, another VCR, a Cable Box/DBS, or an audio source
here. Details are on pages 35 and 48.
CABLE BOX Jack
Connect the Controller here. You may use the Controller with
either a Cable Box or DBS receiver. Details are on pages 49-53.
Rear Panel 23
ANT(enna) IN Jack
Connect your antenna or cable here. Details are on pages 6-9.
S-VIDEO IN Jack
Connect an S-Video cable coming from the S-VIDEO OUT
jack of a camcorder or another VCR here.
S-VIDEO OUT Jack
Connect an S-Video cable going to the S-VIDEO In jack of a
TV here. You may use S-Video connections instead of the
standard RCA-style video (yellow) connections. S-Video
connections provide a better picture.
CH3/CH4 Switch
Set to channel 3 or 4 to use your TV with your VCR. Set your
TV to the same channel. Details are on pages 7-9.
VIDEO IN Jack
Connect a video cable coming from the VIDEO OUT jack of a
camcorder, a Cable Box/DBS, or another VCR here. Details
are on pages 35 and 48.
AC Power Cord
Connect to a wall outlet (120 V) to supply power to the VCR.
RF OUT Jack
Use the supplied RF
coaxial cable to
connect this jack to
the ANTENNA IN
Jack on your TV or to
the IN Jack on your
Cable Box/DBS (if
applicable). Details are
on pages 7-9.
CH3 CH4
RF OUT
ANT.IN
AUDIO
VIDEO
IN OUT IN OUT
R
L
CABLE
BOX
OUT IN S
V
I
D
E
O
VIDEO OUT Jack
Connect a video cable
going to the VIDEO
IN jack of a
camcorder or another
VCR here. Details are
on pages 48 and 55.