Philips AJ7050D-37 - Manual (Page 13)

11
English
EN
5 Listen to radio
Note
• Only FM radio reception is available on this unit.
Tune to a radio station
Tip
•
For optimal reception, fully extend and adjust the
position of the FM antenna.
• Position the antenna as far as possible from TV, VCR or
other radiation source.
• [STEREO] is the default setting for tuner mode.
• In tuner mode, you can press OK/ to toggle
between [STEREO] and [MONO], and the unit
memorizes your setting even if you turn off the unit or
turn to other sources.
1
Press SOURCE repeatedly to select FM
mode.
2
Press and hold TUNE+/TUNE- for more
than 2 seconds.
» The radio tunes to next station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
TUNE+/TUNE- repeatedly until you
find optimal reception.
Program radio stations
Radio station preset allows you to save radio
stations, and quickly tune to a favorite station.
Note
• The preset list can store up to 20 stations.
• If the preset list is fully occupied, the screen will show
[FULL] (full).
• When you save a radio station to a position that has
already been occupied, the original radio station will
be replaced.
Program radio stations manually
1. Press SOURCE repeatedly to enter the FM
mode.
2. Press TUNE+/TUNE- to tune to a radio
station.
3. Press PROG/SCAN.
» A position number flashes.
4. Press OK to save current radio station to the
selected position.
Tip
• Press PRESET +/PRESET - to change the position to
save a radio station.
Program radio stations automatically
1
Press SOURCE repeatedly to enter the
FM mode.
2
Press and hold PROG/SCAN.
» The screen displays [AUTO] (auto);
» The unit starts to scan for all available
radio stations automatically, and stores
them to the preset list.
3
Wait until the auto scan finishes.
» The first station in the preset list
broadcasts automatically.
Select a preset radio station
1
Press / to select a preset number.