Philips PCVC750K - Manual (Page 6)

* = Sticky tape
«
How to mount the
perch:
(Ensure that the
supporting surface is
free of grease and
dirt.)
1.
Remove
backing from
adhesive tape.
2.
Place perch on
top of monitor.
3.
Push disc with
adhesive tape
down through
central perch
hole.
The camera base can be removed by
turning it through 90 degrees (1) and
pulling it down out of the camera (2).
* The camera features a 1/4" UNC
screw thread for tripod mounting.
2.6 Use of the camera pouch
You will also find a convenient carrying pouch in the packaging. This is used as follows:
1.
Fold camera base by rotating it along its length.
2.
Run USB cable along camera, then wind cable around the camera.
3.
Place camera in pouch sideways to ensure best fit.
6