Philips HD8837-47 - Manual (Page 15)

• 15 •
Orange
Green
• Turn the selector dial clockwise to the
“ ” position.
narello when provided) externally.
In this way, all parts will be perfectly
cleaned and free of any milk residue.
• Place a container under the steam/hot
water wand (Pannarello, if supplied).
Orange
Green
• The following icon will be displayed.
• Fill the cup with hot water to the
desired level; to stop hot water dis-
pensing, turn selector dial counter-
clockwise back to the “ ” position. The
machine returns to the normal operat-
ing mode.
Occasionally, after turning
the selector dial, hot water
may not be dispensed and the fol-
lowing icon may be displayed. Simply
wait until the end of the warm-up
phase so that hot water can be dis-
pensed from the Pannarello.
STEAM DISPENSING /
C APPUCCINO BREW-
ING
Steam may be used to froth milk for a
cappuccino, as well as to reheat other
beverages.
Danger of scalding! Brewing
may be preceded by small
spurts of hot water. The steam/
hot water wand may reach high
temperatures. Never touch it with
bare hands.
Important Note: After using
the steam/hot water wand
to froth milk, immediately clean the
wand (or Pannarello when provided).
When the machine is ready, dispense
a small amount of hot water in a glass
and clean the steam wand (or Pan-
• When the machine is ready to brew
coffee, turn selector dial counter-
clockwise to set it onto the “
” posi-
tion. Residual water may dispense from
the steam/hot water wand (Pannarello,
if supplied).
• The following icon is displayed during
the preheating time required by the
machine.
• Steam dispensing will begin when the
following icon is displayed; soon after
only steam will begin to come out.
• Fill 1/3 of the container you wish to use
to prepare the cappuccino with cold
milk.
Use cold milk for better
results when preparing a
cappuccino.
• Turn the selector dial clockwise and
set it back to the “ ” position to stop
dispensing steam.