Input signal, Selection – Philips 107S21-74 User Manual

Page 62

Text mode
Original mode

INPUT SIGNAL SELECTION

(Not available in all models)

INPUT SIGNAL SELECTION determines what you see on the screen. The default setting is INPUT A, but if
the video input signal is different that the output signal, you may want to change it to INPUT B.?

1) Press the

button on the monitor. The MAIN CONTROLS window appears.

2) Press the

button until INPUT SIGNAL SELECTION is highlighted.

3) Press the

button. The INPUT SIGNAL SELECTION window appears.

4) Press the

button to highlight INPUT B or INPUT A.

5) Press the

button to confirm your selection and return to the MAIN CONTROLS window. CLOSE

107S The OSD Controls

file:///C|/rita wu/gs3LF/ENGLISH/107S/osd/osd_cont.htm (4 of 25) [10/12/2000 1:46:11 AM]