Philips 107S21-74 User Manual

Page 51

have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.

Note: The severed plug must be destroyed to
avoid a possible shock hazard should it be
inserted into a 13A socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured in
accordance with the following code:

BLUE - "NEUTRAL" ("N")

BROWN - "LIVE" ("L")

GREEN & YELLOW - "EARTH" ("E")

1. The GREEN AND YELLOW wire must be
connected to the terminal in the plug which is
marked with the letter "E" or by the Earth symbol

or coloured GREEN or GREEN AND

YELLOW.

2. The BLUE wire must be connected to the
terminal which is marked with the letter "N" or
coloured BLACK.

3. The BROWN wire must be connected to the
terminal which marked with the letter "L" or
coloured RED.

Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead - not simply over the three wires.

Regulatory Information

file:///C|/rita wu/gs3LF/ENGLISH/107S/safety/regs/regulat.htm (11 of 11) [10/12/2000 1:45:41 AM]