Philips BDP2105-F7 - Manual (Page 22)

22 EN
5 Update software
Before you update the software of this player,
check the current software version:
• Press , and then select [Setup] >
[Advanced] > [Version Info.], and press
OK.
Update software via the
Internet
1
Connect the player to the Internet (see
“Set up a network”).
2
Press , and select [Setup].
3
Select [Advanced] > [Software Update]>
[Network].
» If an upgrade media is detected, you
are prompted to start the update.
4
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Update software via USB
1
Check the latest software version on www.
philips.com/support.
• Search for your model and click on
“Software and drivers”.
2
Download the software into a USB storage
device.
a
Unzip the download, and make sure
that the unzipped folder is named
“UPG_ALL”.
b Put the “UPG_ALL” folder in the root
directory.
3
Connect the USB storage device to the
(USB) connector on this player.
4
Press , and select [Setup].
5
Select [Advanced] > [Software Update]>
[USB].
» If an upgrade media is detected, you
are prompted to start the update.
6
Follow the instructions on the TV screen
to update the software.
» When the update is complete, this
player automatically turns off and on
again.
Caution
• Do not turn off the power or remove the USB storage
device when the software update is in progress because
you might damage this player.