Philips NP1100-37B - Manual (Page 19)

20
To return to the Home menu, press
HOME.
Network setup
This chapter shows you how to change the
network setup.
Before you connect the NP1100 to a home
network router:
Ensure that the PC meets the minimum
requirements. (see ‘PC connection
requirements’ on page 24)
You can choose from two different modes
of connection:
Wireless connection (see ‘Create wireless
connection’ on page 20)
Wired connection (see ‘Create wired
connection’ on page 20)
Create wireless connection
1
Hold ready your network name and
network password or encryption key.
2
Ensure that your wireless access point or
wireless router is turned on.
3
Ensure that the NP1100 is turned on.
4
On the NP1100, configure the network:
5
Press HOME.
6
Press , then to select [Settings] >
[Network setup] > [Wireless] > [Search
for networks].
7
Press , then to select network.
Enter encryption key (if required).
8
Select [Automatic] > (Enable Proxy?) [No
(default)].
The NP1100 displays a confirmation
screen that the settings are saved.
Create wired connection
1
Ensure that the Ethernet port on the PC is
enabled.
•
•
•
•
•
»
Set the date
1
Ensure that the NP1100 is turned on.
2
Press HOME.
3
Select [Settings] > [Date and time].
4
Press or , then to select [Set date].
5
Press or to adjust, then to confirm
the date.
6
Press to return to the previous selection
menu.
To return to the Home menu, press
HOME.
Set sleep timer
You can select a set time period after which the
NP1100 automatically switches to standby.
The timer offers the following options:
[Off]
[15 minutes]
[30 minutes]
[1 hour]
[1.5 hours]
[2 hours]
1
Ensure that the NP1100 is turned on.
2
Press HOME.
3
Select [Settings] >[Sleep timer].
4
Press to select, then press .
To return to the Home menu, press
HOME.
Set button sound (Clicker)
1
Ensure that the NP1100 is turned on.
2
Press HOME.
3
Select [Clicker sound].
4
Press to select [Enable] or [Disable],
then press .
5
Press to return to the previous selection
menu.
•
•
•
•
•
•
•
•
EN