Philips DVD590M-17 - Manual (Page 36)

MUTE
DISPLAY
REPEAT REPEAT
SUBTITLE ANGLE ZOOM AUDIO
SEARCH
RETURN/TITLE
SYSTEM MENU DISC MENU
EJECT
NEXT PREVIOUS
1 2 3
4 5 6
7 8 9 0
A-B
OK
• If you set DIGITAL OUTPUT to
LPCM 96K, the sound may be
mute if the Disc is copy
protected by the Content
Scrambling System (CSS).
36 Digital Output
Helpful Hint
Adjust DIGITAL OUTPUT if you connected the DVD Player to a Stereo
using the Player’s COAXIAL (DIGITAL AUDIO OUTPUT) jack.
1 Press SYSTEM MENU.
2 Press 1 or 2 repeatedly to select the AUDIO menu.
3 Press 4 to select DIGITAL OUTPUT.
4 Press 1 or 2 repeatedly to select BITSTREAM, LPCM 48K,
LPCM 96K, or OFF. Then press OK.
● Choose BITSTREAM if you connected to a Stereo using the Player’s
COAXIAL ( DIGITAL AUDIO OUTPUT) jacks.This selects the
original settings as received by most Stereos. If the sound is
distorted, your Stereo may need to receive audio in an LPCM (Pulse
Code Modulation) format.
● LPCM 48K or LPCM 96K
Discs are recorded in a certain sampling rate. The higher the
sampling rate, the better the sound quality. Some Discs are
recorded in a high sampling rate of LPCM 96 KHz, while most are
recorded at 48 KHz. Choose LPCM 96K only if your Discs were
recorded at 96 KHz. Otherwise, set DIGITAL OUTPUT to LPCM
48K.
5 Press SYSTEM MENU to remove the menus.
2-4
DIGITAL OUTPUT BITSTREAM DIGITAL OUTPUT
AUDIO AUDIO
DVD
SYSTEM MENU : EXIT : MOVE : SELECT
1,5
DVD590M_17x 6/11/2003 1:42 PM Page 36