Philips DS3881W-37 User Manual
Page 14
14
Collect settings of your home Wi-Fi
router
Note
•
Always consult the user manual of your home Wi-Fi
router for detailed instructions.
1
Connect your Wi-Fi enabled device to
your existing home Wi-Fi network.
2
Launch the Internet browser (for example,
Apple Safari or Microsoft Internet
Explorer) on your Wi-Fi enabled device.
3
Open the configuration page of your
home Wi-Fi router.
4
Find the Wi-Fi settings tab and write down
the following information on paper:
A
Network name (SSID)
B
Wi-Fi security mode (usually WEP,
WPA or WPA2 if enabled)
C
Wi-Fi password (if Wi-Fi security is
enabled)
D
DHCP mode (enabled or disabled)
E
Static IP address settings (if DHCP
mode is disabled)
Switch DS3881W to Assisted Wi-Fi
Setup mode
Note
•
Before you press any button on DS3881W, make sure
that DS3881W has been booted up successfully (see
‘Turn DS3881W on’ on page 12).
To connect DS3881W to a Wi-Fi router
manually, you need access to DS3881W’s
built-in configuration web page for change of
its internal Wi-Fi settings. To do so, you need a
Wi-Fi enabled device with an Internet browser
for temporary Wi-Fi connection to DS3881W.
The Wi-Fi enabled device can be an iPod touch/
iPhone/iPad or a Wi-Fi enabled PC/Mac.
Follow the sequence below for connection of
DS3881W to a non-WPS wi-Fi router.
1
Collect settings of your home Wi-Fi router
and write down on paper for use during
DS3881W Wi-Fi setup (see ‘Collect
settings of your home Wi-Fi router’ on
2
Switch DS3881W to Assisted Wi-Fi Setup
mode (see ‘Switch DS3881W to Assisted
Wi-Fi Setup mode’ on page 14).
»
A new Wi-Fi network created by
DS3881W will appear, with the
network name (SSID) of Philips Fidelio
AirPlay.
3
Connect your Wi-Fi enabled device to the
created new Wi-Fi network temporarily
(see ‘Connect your Wi-Fi enabled device
to the newly created Wi-Fi network’ on
4
Open the built-in web page of DS3881W
with the Internet Browser of your Wi-Fi
enabled device (see ‘Open the built-in web
page of DS3881W’ on page 17).
5
Change the internal Wi-Fi settings of
DS3881W based on the settings you
wrote on paper at step 1 (see ‘Change the
internal Wi-Fi settings of DS3881W’ on
6
Restore your Wi-Fi enabled device back
to your existing home Wi-Fi settings (see
‘Restore your Wi-Fi enabled device back
to your existing home Wi-Fi setting’ on
EN