Philips DVD-VCR Player DVP3340V Direct Dubbing Progressive Scan - Manual (Page 2)

Connection to a Cable / Satellite Box
1 Disconnect the power cords of the devices from the AC outlet.
2 Make the connection as illustrated below.
3 Plug in the power cords of the devices to the AC outlet.
For additional connection diagrams, see the accompanying User Manual.
Connect
To connect to your television, follow the instructions under ‘Connection to your
TV’.
1
REAR OF TV (EXAMPLE ONLY)
REAR OF DVD+VCR
VCR IN LINE 1 DVD/VCR OUT AUDIO OUT
AUDIO AUDIO
VIDEO VIDEO COAXIAL
DVD EXCLUSIVE OUT
DVD EXCLUSIVE OUT
R
AUDIO VIDEO L
R AUDIO VIDEO L
or
Set-top Box
Antenna
Cable TV
Wall Jack
RF Coaxial cable
RF Coaxial cable
RCA video cable
(Not supplied)
RCA audio cable
(Not supplied)
RCA
audio
cable
RCA
video
cable
Connection to your TV
1 Disconnect the power cords of the devices
from the AC outlet.
2 Connect the yellow video cable to the yellow
VIDEO IN jack of the TV and to the yellow
AV OUT video jack at rear the unit.
3 Connect the red and white audio cable to
the respective red and white audio jack of
the TV and to the respective red and white
AV OUT audio jack at rear the unit.
4 Plug in the power cable from the DVD/VCR
to an AC power outlet.
REAR OF TV (EXAMPLE ONLY)
REAR OF DVD+VCR
VCR IN LINE 1 DVD/VCR OUT AUDIO OUT
AUDIO AUDIO
VIDEO VIDEO COAXIAL
DVD EXCLUSIVE OUT
DVD EXCLUSIVE OUT