beautypg.com

24 recording – Philips SVZ122AT User Manual

Page 24

background image

VCR/TV

POWER

EJECT

1

2

3

4

5

6

7

8

9

0

+100

CHANNEL

SPEED

RENTAL

SELECTOR

AUTO

REPEAT

CLOCK/

COUNTER

EXIT

COUNTER

DISPLAY

MENU

RESET

MEMORY

REWIND

/ PLAY

F.FWD

RECORD

PAUSE/STILL

/ STOP

Read and follow the steps below to record a television program.

1

Turn on the TV; set it to channel 3 or 4, whichever the
CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact (see page five) in
the VCR.
The POWER, VCR/TV, and CST.IN lights will appear.

3

If the VCR/TV light does not appear, press the VCR/TV
button so that the VCR/TV light appears.

24 Recording

Turn on the TV.

Insert a tape.

1

2

3

• Other recording options are on

pages 25 - 32.

• The VCR will record in a preset vol-

ume.

• Pause mode will automatically

switch to Stop mode after five min-
utes to protect the VCR and the
tape from damage. When a record-
ing is paused, you may review the
time remaining with the

marks

on-screen. Each mark equals one
minute remaining. During the last
minute of paused recording, the

mark will flash.

• If any menu is activated on the TV

screen, the RECORD button on the
remote control does not function.
Press the COUNTER RESET/EXIT
button to remove the menu. Then,
press the RECORD button.

Helpful Hints

4

Press the SPEED button until the desired tape speed
appears on-screen.
The tape speed will disappear after about
five seconds.
You can change the tape speed while the VCR is recording, but
some distortion may appear on the tape. Details about tape speed
are on page 40.

5

Use the CHANNEL o/p buttons or the Number buttons
to select the channel to be recorded.

6

Press the RECORD button once to start recording. The
REC(ord) light will appear. If the tape is missing the record tab,
the VCR will eject the tape.

7

To pause the recording (for example, during commer-
cials), press the PAUSE/STILL button once.
The REC(ord)
light will flash.
To resume recording, press the RECORD button or the
PAUSE/STILL button again.
The REC(ord) light will appear.

8

Press the STOP button to stop recording.

7

8

5

4

6

SVZ122(H1680).QX33 4/6/99 9:42 PM Page 24

This manual is related to the following products: