Philips SDV9011K-17 - Manual (Page 5)

5
E N
Parts included:
a. UHF Boom-A . . . . . . . . . . . . 2
b. UHF Boom-B . . . . . . . . . . . . 2
c. VHF Boom-A . . . . . . . . . . . . 1
d. VHF Boom-B . . . . . . . . . . . . 2
e. Reflector Elements . . . . . . . 2
f . 46˝ Element . . . . . . . . . . . . 2
g. 50˝ Element . . . . . . . . . . . . 2
h. Tubing Brace . . . . . . . . . . . . 2
j . Phasing Wire . . . . . . . . . . . . 2
k. Reflector Brackets . . . . . . . . 2
l . Pivot Brackets . . . . . . . . . 4
n. Locking Brackets . . . . . . . . . 4
p. End Caps . . . . . . . . . . . . . . . 8
q. Screws (1-3/4˝) . . . . . . . . . 5
r . Screws (1-1/2˝) . . . . . . . . 1 0
s . Screws (3/4˝) . . . . . . . . . . 2
t . Lock Washers/ Washers . 6, 4
u. Wing-Nuts . . . . . . . . . . . . . 1 7
v. Nuts . . . . . . . . . . . . . . . . . . 6
w.
Band Separator . . . . . . . . . . . . 1
x. U-Bolt . . . . . . . . . . . . . . . . . 3
y. Cross Piece (for U-Bolt Assembly) 3
z. Antenna Saddle . . . . . . . . . . 1
*Quantities listed include those which may already be attached to
antenna
NOTE: Cable, mast and mounting brackets are not included.
Included with
Assembly
Note: For final installation
and connection of your
antenna, additional hardware
may be required. Before
starting assembly, please
read through the instructions
carefully to determine your