Bushnell 118322 User Manual

Page 11

System Requirements (Minimum)

Software Installation

Transferring The Photos & Videos to Your PC - Step by Step

OS: Windows® 98/98SE/2000/ME/XP/Vista (PhotoSuite 5 is not compatible with Vista)
CPU: MMX Pentium® 200MHZ equivalent or faster (

entium® iii 500 MHz for PhotoSuite5™)

Memory: 32MB minimum (64MB recommended for PhotoSuite)

SVGA video card w/2MB VRAM, 800x600 screen display, 16 bit High color

200 MB available hard disk space (if installing PhotoSuite)

internal USB Port

if you are using Windows 98, you must install drivers before connecting the camera to your PC. insert the CD-ROM

into your computer’s CD drive; it will auto-run and the install screen will be displayed. Select “install Driver”, then

follow the directions. After installation, restart your computer. Windows 2000, ME, and XP do not require drivers,

as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were stored on

an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer, you may

install Roxio PhotoSuite® from the CD-ROM. Be sure to read the “Release Notes” completely, noting any tips or

potential issues relevant to your PC configuration and OS.

1. Be sure the driver has been installed first if you are on Windows 98/98SE.

2. Connect the supplied cable to the imageView’s USB port, then directly to a main USB port on your computer-do

not use front panel/keyboard USB ports or unpowered “hubs”.

CAUTION: Make sure you download all photos/videos from your
camera's internal memory before removing the batteries.

Note: With Windows Vista, you may encounter error or warning messages (“file missing”, etc) while

installing PhotoSuite 5, but clicking “OK” and proceeding should allow the installation to finish.

ImageView 118322 English+Spanish11 11

11/13/07 8:06:41 PM