Bunn G9-2T HD - Manual (Page 3)

3
USER NOTICES
Carefully read and follow all notices on the grinder and in this manual. They were written for your protection. All notices on the
grinder are to be kept in good condition. Replace any unreadable or damaged labels.
#05942.0000
DISPENSE TIME (Seconds)
DISPLAY
Increase Decrease
Readout will be displayed for 5 minutes.
Timer can only be adjusted
while readout is displayed.
+
WARNING
HAZARDOUS VOLTAGE
UNPLUG GRINDER
BEFORE REMOVING!
Use only on a properly protected circuit
capable of the rated load.
Electrically ground the chassis.
Follow national/local electrical codes.
Do not use near combustibles.
An extension cord, when used, must be shorter
than 20 feet if 16-gage 3-conductor wire, or
shorter than 10 feet if 18-gage 3-conductor wire.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE, OR SHOCK HAZARD
READ THE ENTIRE OPERATING MANUAL
INCLUDING THE LIMIT OF WARRANTY AND
LIABILITY BEFORE BUYING OR USING THIS PRODUCT
20545-0000 7/90 © 1990 Bunn-O-Matic Corporation
WARNING
#20545.7000
RIGHT
DISPENSE TIME
(SECONDS)
3.2
6
10
15 20
25
30
32
3.2
.4 .4
1 1
2 2
3 3
4
6
10
15 20
25
30
32
4
LEFT
HIGH
UNPLUG GRINDER
BEFORE REMOVING
WARNING
HAZARDOUS VOLTAGE
HIGH
LOW
HIGH
HIGH
LOW
LOW LOW
PERSONAL INJURY
HAZARD.
KEEP FINGERS AND
FOREIGN OBJECTS
OUT OF HOPPER
OR CHUTE OPENING.
CAUTION
#05876.7999
#25763.0000