Philips HD8772-47 - Manual (Page 50)

48 ENGLISH
Y
ello
w
2 Remove the Automatic Milk Frother from the steam/hot water wand.
3 Remove the “INTENZA+” water fi lter from the water tank if it was in-
stalled and replace it with the small white original one. Place the water
tank back into the machine.
4 Press the “ ” button until the following display is shown.
5 Press the “ ” button to start the descaling process.
Y
ello
w Note:
If you press the “ ” button by mistake, press the “ ” button to quit.
6 Remove the water tank and pour in the entire contents of the descal-
ing solution. Then top up the tank with fresh water up to the calc clean
level.
7 Place the water tank back into the machine.
8 Place a large container (1.5 l) under both the steam/hot water wand
and the dispensing spout.