Philips HD8772-47 - Manual (Page 23)

21 ENGLISH 21
Adjusting the Beverage Cup Length
The machine allows you to adjust the amount of brewed coff ee according
to your taste and the size of your cups.
Each time the “
”, “ ” or “ ” button is pressed, the machine brews a
pre-set amount of beverage. Each button may be individually programmed
for a specifi c brew setting.
The following procedure describes how to program the “ ” button.
1 Place a cup under the dispensing spout.
Gr
een
3 Press and hold the “ ” button until the “MEMO” icon appears on
the display, then release the button. The machine has now entered
programming mode.
The machine starts brewing coff ee.
4 Press the “ ” button as soon as the desired amount of coff ee is
reached.
Now the “ ” button is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
To program the other two “ ” or “ ” beverages, the same steps should
be followed. You should always use the “ ” button to stop brewing
coff ee when the desired amount of coff ee is reached even when you are
programming the other two “
”or “ ” beverages.
Gr
een
2 Check the position of the selection lever.