Philips NP2900-37B - Manual (Page 9)

7
En
Select your network from the list of found networks and confirm. 5
Enter the encryption key (if required) and confirm. 6
(press CLEAR to delete last character entry /
press hold CLEAR to delete line entry)
The player >
acquires the automatic IP address;
shows the confirmation for the connection to the network;
shows the prompt for the connection to the Internet.
Select [ 7 Yes] to connect to the Internet.
The player shows the confirmation for the connection to the Internet. >
You can go to section Enjoy and listen to Internet radio at this point.
This icon indicates steps on your remote control!
Here is how to create a wireless connection any time ‘after’ the initial setup:
Ensure that your network name and network password or encryption key are available. 1
Turn on the player. 2
Turn on your wireless access point or wireless router with broadband Internet access. 3
Press 4 SETTInGS , to go to the Settings menu.
Select [ 5 Wireless (WiFi)] to start the network setup process.
For wireless routers with Wi-Fi protection system (WPS) that supports push •
button configuration (PBC): On the router, press the WPS PBC push button (often
displayed as ) to activate. On NP2900 press OK to confirm.
For wireless routers with Wi-Fi protection system (WPS) that supports a personal •
identification number (PIN): On NP2900 select WPS PIN, then enter the displayed
PIN on the router.
For other wireless routers: •
NP2900 searches for networks. >
np2900_qsg_37_01eng.indd 7 3/20/2009 5:17:10 PM