Philips DVDR3350H-37 - Manual (Page 74)

E
ng
li
sh
74
Display panel symbols/ messages
The following symbols/messages may
appear on your recorder display:
00:00
Multifunction display/ text line
– Title/track number
– Total/elapsed/remaining title/track time
– Disc/title name
– Additional information regarding the disc
– TV channel number or source of video
– Clock (This is displayed in Standby mode).
– TV program title
X
TIMER
A timer recording has been programmed
or is active.
BLANK
No recordings on the disc.
BLOCKED
The disc tray cannot be opened or closed
due to some mechanical obstruction.
CLOSING
Disc tray is closing.
DISC
The disc edit menu is on.
EMPTY
No recordings in the hard disk drive.
UPDATE
Please wait until the blinking message
disappears. The disc is being formatted or
data is being written to it.
MENU
The system setup menu, disc menu, title
menu or timer menu display is on.
HDDMENU
The hard disk menu display is on.
NO DISC
No disc has been inserted. If a disc has
been inserted, then it is possible that the
disc cannot be read.
NOSIGNAL
No signal or poor signal strength.
OPEN
Disc tray is opened or opening.
PRO SCAN
Lights up when progressive scan is
activated.
READING
Disc is being recognized by the recorder.
PHILIPS
The recorder has been turned on.
UNKNOWN
The disc cannot be read.
UPDATE
Please wait until the message disappears.
Data is being written to the disc.
SCANXXX
Please wait until this message disappears.
The recorder is busy processing an
operation. XXX indicates the number of
found channels, and is constantly updated
¡
_CHXXX
In time shift mode, where XXX indicates
the input video source or channel
number of tuner input.