Philips FWR7 - Manual (Page 14)

BASIC FUNCTIONS
14
• To switch the unit on press y STANDBY ON on the unit.
• To switch the unit to standby press y STANDBY ON
again on the unit (2 on the remote control).
Important!
1) This system is designed for regular CD(RW)s.
Therefore, do not use any accessories such as disc
stabilizer rings or CD treatment sheets, etc. as offered
on the market, because they may cause jamming of
the changer mechanism.
2) Do not load more than one disc into one disc tray.
1 CD changer:
Press OPEN/CLOSE on the unit to open the CD changer tray.
y Open CDC is displayed and the tray is opened.
CD recorder:
Press OPEN/CLOSE on the unit to open the CD recorder tray.
y Open CDR is displayed and the tray is opened.
2 CD changer:
You can load up to three discs in the CD changer for
continuous playback without interruption. Insert an
audio disc (printed side up) in the right disc tray.
• You can load another disc in the left disc tray.
• To insert a third audio disc, press CD CHANGE on the unit.
y The CD carousel will rotate until the empty disc tray
is at the right hand side.
CD recorder:
Insert an audio disc (printed side up) in the tray.
3 CD changer:
Press OPEN/CLOSE on the unit again to close the tray.
y The tray is closed and Reading is displayed.
y If an unfinalized disc is inserted, Initializing will
be displayed.
y CD, the disc tray number, the total number of tracks and
the total playing time of the disc in the last selected
disc tray are displayed. The track numbers light up in
the music calendar.
CD recorder:
Press OPEN/CLOSE on the unit again to close the tray.
y The tray is closed and Reading is displayed.
y If an unfinalized disc is inserted, Initializing will
be displayed.
y CDR, the total number of tracks and the total playing
time of the disc are displayed. The track numbers light
up in the music calendar.
1 Press PLAY/PAUSE #* (Éon the remote control) to start
playback.
CD changer:
y CD, the disc tray number, the current track number and
elapsed playing time are displayed. The current track
number is also blinking in the music calendar.
CD recorder:
y CDR, the current track number and elapsed playing time
are displayed. The current track number is also blinking
in the music calendar.
• To switch through the following information, repeatedly
press DISPLAY on the unit:
y Track number, remaining playing time of current track
y Track number, remaining playing time of disc
y Track number, actual playing time of current track
2 Press STOP
& (Çon the remote control) to stop playback.
CD changer:
y CD, the disc tray number, the total number of tracks and
the total playing time of the disc are displayed.
CD recorder:
y CDR, the total number of tracks and the total playing
time of the disc are displayed.
• To switch through the following information, repeatedly
press DISPLAY on the unit:
y Total number of tracks, total playing time of disc
y CD text is displayed.
• You can interrupt playback by pressing PLAY/PAUSE #*
(Åon the remote control).
y The time where playback was interrupted is blinking.
• To resume playback press PLAY/PAUSE #* (Éon the
remote control) again.
Playing a CD(RW)
Loading the CD changer, CD recorder
Switching on, switching to standby
CD RECORDAB LE MINI HIFI SY STEM
STANDBY
ON
CD 1
CD 2
CD 3
CD CHANGE
OPEN/CLOSE
DISPLAY
CDR
iR SEN SOR
TUNER
DIGITAL / ANALO G
AUX
CD T EXT CLOC K/TIM ER
OPEN/C LOSE
JO G CO NTROL
TRACK
TEXT
R EC
LE VE L
SEARCH
EDIT P R O G
SEARCH
FINALIZ E
ERASE
REC TY PE
CD CD
COMP ILE
CD
RECOR D
Y E S
N O
MA STE R VOL UME
D S C P U R E
LO U D N E S S
INC REDIBLE SU RR O U N D
FW- R7
CD -TEXT EDITING
CD RECO RDER
CD REWRITABLE COMP ATIBLE • 3 CD CHANGER
PLAY/
PAUSE
STOP
English