Philips DVD Micro Theater MCD139B - Manual (Page 18)

18
English
Step 1: Using Remote Control
IMPORTANT!
– Before using the remote control,
remove the insulation plastic tab as
shown in the picture below.
– If the remote control does not
function correctly or the operating range
is reduced, replace the battery with a
new (CR2025) battery.
1
Push to open the batter y tray.
2
Replace a new battery according to the
indicated polarity.
3
Push the battery tray back to close it.
Using the Remote Control to operate
the Player
1
Aim the Remote Control directly at the remote
sensor (IR) on the front panel.
2
Select the source you wish to
control by pressing one of the
source select buttons on the
remote.
3
Then select the desired
function (for example,
ÉÅ, ¡ or ™).
CAUTION!
– Perchlorate Material-special handling
may apply. See www.dtsc.ca.gov/
hazardouswaste/perchlorate.
– Remove the battery if it is exhausted
or if the Remote Control is not being
used for a long time.
Getting Started
– Batteries contain chemical substances,
so they should be disposed of properly.
Step 2: Setting up the TV
IMPORTANT!
Make sure you have completed all the
necessary connections. (See
“Connecting TV”).
1
Switch the DVD system on and then select
DISC source. (See “Switching the system
on/off”).
2
Turn on the TV and set to the correct video-in
channel. You should see the blue Philips DVD
background screen on the TV.
➜
Usually these channels are between the
lowest and highest channels and may be called
FRONT, A/V IN, or VIDEO. See your TV manual
for more details.
➜ Or, you may go to channel 1 on your TV, then
press the Channel up button repeatedly until
you see the Video In channel.
➜
Or, the TV Remote Control may have a
button or switch that chooses different video
modes.
➜
Or, set the TV to channel 3 or 4 if you are
using an RF modulator.
Selecting the color system that matches
your TV set
This DVD system is compatible with both NTSC
and PAL. For the playback of a DVD disc on this
DVD system, the color systems of the DVD, TV
set and DVD System should match.
M I C RO T H E AT R E M C D 1 3 9
SOURCE
STANDBY-ON
ECOPOWER
AUDIO MUTE
+
OK
SYSTEM MENU
MODE CLOCK A-B SLEEP/TIMER
DISPLAY OSD
DISC MENU
DISC AUX TUNER
4
TV DISPLAY
TV TYPE MULTI
SET TO MULTI
SCREEN SAVER
MODE CLOCK SLEEP/TIMER
pg001-pg039-MCD139B_37_Eng 20/12/06, 17:21 18