beautypg.com

Getting started, Finding the correct viewing channel, Setting the speakers – Philips HTS6600-37 User Manual

Page 22

background image

22

English

Finding the correct viewing
channel

A

Press SOURCE button on the main unit

until ‘DISC SOURCE’ appears on the
display panel (or DISC/USB on the
remote control.)

B

Turn on the TV and switch it to the

correct video-in channel.

You may go to the lowest channel on

your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.

You may press ° button repeatedly

on your TVs remote control.

Usually this channel is between the

lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..

If you are using a RF modulator, set

the TV to channel 3 or 4.

Refer to your TVs user manual on

how to select the correct input on your
TV.

Before you start ...
When you complete the connections and
turn on this unit to the ‘DISC SOURCE’
mode for the fi rst time, you should see
the speaker setup message on the TV.

To optimize the Ambisound Surround effect for your

home environment, first set up your speakers correctly.

Go to the Speaker Setup in the Setup Menu.

Press ‘SETUP’ key on the Remote Control to continue.

Press ‘STOP’ to exit.

It is advisable that you make several basic
settings to optimize the performance of
this unit. See the following pages for
more information.

Getting Started

Setting the speakers

There are three parameters to adjust the
speakers: room acoustics, distance
between speakers and listening position.
Change the speaker settings according to
your room environment and setup.

A

Press SETUP on the remote control.

{ General Setup Page } menu

appears.

General Setup Page

Ambisound Setup

Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code

B

Press cursor down key to highlight

{ Ambisound Setup } and press cursor
right key to select.

C

Select { Room Acoustics } and press

cursor right key.

Hard

Soft

Room Acoustics

Speaker Distance

Listening Position

D

Select the condition of the room and

press OK to confi rm.

{ Hard } for concrete or wood

surroundings.

{ Soft } for curtains or an open space

surroundings.

This manual is related to the following products: