Installation, Package contents, Ventilation – Bogen C35 User Manual
Page 6: Rack mounting
Installation
Package Contents
• Classic Series Amplifier
• Instruction Manual
Ventilation
When using a shelf or table mount, the amplifier should stand alone with no equipment on top of it or below
it. If the amplifier must be stacked with other equipment, care must be taken to ensure that all the minimum
clearance distances (
1
/
2
") are met and that the equipment below the amplifier produces little significant heat.
Rack Mounting
A rack mount bracket kit (Model RPK50) is available as an accessory. (Not included.)
4
This manual is related to the following products:
- C100 C60 SEC4T 4" Compact 4W Ceiling Speaker BCWR Receiver ANS501 AMT-12 UTI312 OCS1 SAX1R Unbalanced Stereo Input Module C100 Classic Series 100W Public Address Amplifier HDO100 Handheld Omnidirectional Dynamic Microphone KFLDS30T 30W Wide-Dispersion Reentrant Horn Loudspeaker (Mocha) HDU150 Handheld Cardioid Dynamic Microphone ADP1 Analog Door Phone - Two-way Terminal for Telephone Systems HDU250 Handheld Cardioid Dynamic Microphone