Panel descriptions, Classic series rear panel – Bogen C35 User Manual
Page 5
Panel Descriptions
Classic Series Rear Panel
1
.Amplifier Output
Screw terminal strip containing all available speaker outputs.
2.Tape/Booster
RCA unbalanced signal level/output.
3.WMT1A
RCA output connection for Bogen’s 600-ohm balanced line matching transformer Model WMT1A.
4.AUX Terminal
Screw terminal connection that allows externally controlled muting of AUX inputs with a contact closure.
5
. Microphone Inputs
Screw terminal strip containing the MIC1 and MIC2 balanced, low-impedance inputs.
(MIC2 is switch-selectable.)
6.Auxiliary Inputs
RCA unbalanced,AUX1 and AUX2 high-impedance inputs. (AUX1 is switch-selectable.)
7.TEL Input
Screw terminal input for 600-ohm balanced telephone signal.
8.VOX SENS Control
Variable control for adjusting TEL input signal level trigger point for automatic muting of Aux input.
9.TEL Volume Control
Adjusts the telephone input paging level.
3
- C100 C60 SEC4T 4" Compact 4W Ceiling Speaker BCWR Receiver ANS501 AMT-12 UTI312 OCS1 SAX1R Unbalanced Stereo Input Module C100 Classic Series 100W Public Address Amplifier HDO100 Handheld Omnidirectional Dynamic Microphone KFLDS30T 30W Wide-Dispersion Reentrant Horn Loudspeaker (Mocha) HDU150 Handheld Cardioid Dynamic Microphone ADP1 Analog Door Phone - Two-way Terminal for Telephone Systems HDU250 Handheld Cardioid Dynamic Microphone