Barco R9002240 - Manual (Page 55)

Orbiting
A-3 5975628 BARCOGRAPHICS 1209s 010797
Adjustment procedure multiple projector installations :
Inportant : to allow corrections in the deviation alignments of the slave
projectors, never adjust the deviations of the master projector to its
maximum.
Default setting of the Master projectorn see 'Stand-Alone projector'.
Highlight 'ADJUST DEVIATION' by pushing the control stick forward
or backward and press ENTER.
When adjusting the horizontal and the vertical deviation, the picture
moves in corresponding direction, allowing the set up of the deviation
without orbiting operation.
to return.
SLAVE ORBITING
CHANGE TO MASTER
ADJUST DEVIATION
SELECT WITH OR
THEN
DEVIATION ADJUST :
VERTICAL WITH OR
HORIZONTAL WITH OR
Adjust horizontal deviation by pushing
the control stick to the left or to the right
Adjust vertical deviation by pushing
the control stick forw ard or backw ard
Push the control stick to the right or backward to toggle between Hor.
and Vert. deviation adjustment.
Horizontal
orbit ampl.
60
Vertical
orbit ampl.
60