Philips HTS3264D-37B - Manual (Page 20)

20
English
Finding the correct viewing
channel
A Press STANDBY-ON to turn on the
unit.
B Press DISC on the remote control.
C Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
If you are using a RF modulator, set
the TV to channel 3 or 4.
Refer to your TVs user manual on
how to select the correct input on your
TV.
Getting Started
Switching to different play
source
On the main unit
Press the SOURCE button on the main
unit repeatedly to select:
DISC FM AUX1 AUX2
MP3 LINK DOCK DISC ...
Or
On the remote control
Press AUX (MP3 LINK) repeatedly to
hear the audio output from the external
device.
‘AUX1’ for device connected to
AUDIO IN-AUX1 jacks.
‘AUX2’ for device connected to
AUDIO IN-AUX2 jacks.
‘MP3 LINK’ for device connected to
MP3 LINK jack.
Press RADIO to switch to FM band.
Press USB to switch to USB mode.
Press DOCK to switch to iPod mode.
Press DISC to switch to DISC mode.
1_hts3264D_37_eng4_final810.indd20 20 1_hts3264D_37_eng4_final810.indd20 20 2008-03-13 10:29:40 AM 2008-03-13 10:29:40 AM