BT 5210 - Manual (Page 15)

BT Diverse 5210 ~ 6th Edition ~ 16th May ’03 ~ 5185
13
BT Diverse Helpline – 08457 908 070
4 Connect the telephone
line cord to the base and
plug into the wall socket
Ensure that each end of the line cord is
fitted into the correct socket.
Fit the belt clip onto the back of the
handset.
Your BT Diverse 5210 is now
ready for use.
S Sllo ott
SETTING
UP
Setting the date and time
Press the Menu options button.
Press the DOWN navigation
button until the display shows
Calendar/Clock .
Press the OK options button.
Date/Time appears.
Press the OK options button.
Enter the day/month/year, e.g.
05 10 03 for 5th October 2003.
Press the OK options button.
Enter the time – hours/minutes.
e.g.
0925 for 9:25am.
Press the OK options button.
Use the UP/DOWN navigation
buttons to select am/pm if in 12
hour mode.
Press the OK options button.
Press the DOWN navigation
button to Time Mode .
Press the OK options button.
Use the UP/DOWN navigation
buttons to select 12 or 24 hour
display (12hr is the default).
Press the OK options button.
Press the RED PHONE button
until you reach the idle display.
OK
MENU
OK
OK
OK
OK
OK
OK
Note
If you subscribe to a Caller Display
service the time and date will be set
with the first incoming call.
However, the year setting will have to
be changed manually. See opposite.