Philips DC291-37 - Manual (Page 18)

18
To deactivate sleep timer
1
Press SLEEP repeatedly until [OFF] (off)
is displayed.
» When the sleep timer is deactivated,
disappears on the display.
Adjust display brightness
1
Press BRIGHTNESS/REP ALM repeatedly
to select different levels of display
brightness.
Activate and deactivate the alarm
timer
1
Press ALM 1 or ALM 2 repeatedly to
activate or deactivate the timer.
» If the timer is activated, [ AL 1] or
[ AL2] is displayed.
» If the timer is deactivated, [ AL1] or
[ AL2] disappears.
Repeat alarm
1
When the alarm rings, press
BRIGHTNESS/REP ALM.
» The alarm repeats ringing minutes later.
Tip
• You can press / to adjust the interval to
repeat alarm.
Stop alarm ring
1
When the alarm rings, press the
corresponding ALM 1 or ALM 2.
» The alarm stops but the alarm settings
remain.
View the alarm settings
1
Press ALM 1 or ALM 2.
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1
Press SLEEP repeatedly to select a set
period of time (in minutes).
» When the sleep timer is activated, the
display shows , and the volume will
gradually decrease in the last 5 minutes.
EN
DC291_37_UM_V7.1.indb 18 12/3/2013 10:59:11 AM