Philips SA4ARA16KF-37 - Manual (Page 12)

12 EN
3 Get started
Charge power
ARIAZ has a built-in battery that can be
charged through the USB port of a computer.
Connect ARIAZ to a PC by using the USB
cable.
Note
‡ When you connect ARIAZ to a computer, you are
EULHÁ\ SURPSWHG WR VHOHFW [Charge & transfer] or
[Charge & play]. If no option is selected, [Charge &
transfer] applies.
‡ To play ARIAZ when you charge power, select [Charge
& play].
Battery level indication
The display indicates the approximate levels of
the battery status as follows:
100% 75% 50% 25% 0%
» $ ÁDVKLQJ EDWWHU\ VFUHHQ LQGLFDWHV WKDW
the battery is low. The player saves
all settings and switches off within 60
seconds.
Note
‡ Rechargeable batteries have a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
‡ The charging animation stops and the icon is
displayed when the charging process is completed.
To conserve battery power and increase the
play time, do the following on ARIAZ:
‡ Set the backlight timer to a low value
(go to > [Display settings] >
[Backlight timer]).
Switch the player on or off
Press and hold until the player is switched
on or off.
Automatic standby and shut-down
The player has an automatic standby and shut-
down feature that can save battery power.
After 10 minutes in idle mode (no play, no
button is pressed), the player switches off.