Philips HTS6120-37 User Manual
Page 34
34
Search and store radio stations
individually
1
Press
RADIO .
2
Press
/ .
It starts searching until a radio station
»
is detected.
3
Repeat step 2 until you tune to the radio
station you wish to store.
To À netune the radio frequency,
•
press / .
4
Press
PROGRAM .
The preset station number blinks.
»
If no action is carried out within 20
»
seconds after the above step, it exits
the preset mode.
5
Press
/ (or the Numeric buttons ) to
select a preset number to store.
6
Press
PROGRAM to conÀ rm.
Listen to radio
1
Press
RADIO .
2
Use the remote control to control the
radio.
Button
Action
Selects a preset radio station.
Tunes the radio frequency up or
down.
Press and hold this button to
erase the current radio station
from the preset list.
The preset number for other
radio stations remain unchanged.
Tip
Press
•
AUDIO SYNC to toggle between FM
stereo and FM mono mode.
Reinstall all the radio stations
1
Press
RADIO .
2
Press and hold PROGRAM for more than
5 seconds.
All previously stored radio stations are
»
replaced.
Note
Check the radio antenna connection if no
•
stereo signal is detected or less than 5 stations
are detected during radio installation.
EN