Philips HTS6120-37 User Manual

Page 13

Option 4: Connect to the RF
modulator

If your TV only has a single Antenna Input
jack (labeled as 75 ohm or RF In), use a RF
modulator to view the disc play on the TV.

Connect a composite video cable

(yellow) from the VIDEO jack on this
Home Theater System to the video input
jack on RF modulator.

Connect a RF coaxial cable (not supplied)

from the ANTENNA OUT or TO
TV jack on the RF modulator to the
ANTENNA IN jack on your TV.

If the off-air antenna or Cable TV service

signal is connected to your TV, disconnect
it from your TV and connect it to the
ANTENNA IN or RF IN jack on the RF
modulator.

Tip

See your electronics retailer or contact Philips

•

for details about RF modulator availability and
operations.

VIDEO OUT

Option 3: Connect to the Video
(CVBS) jack

Connect a composite video cable to the

VIDEO OUT jack on this Home Theater
System and the VIDEO input jack on the
TV.

Note

The video input jack on the TV might be

•

labeled as A/V IN, VIDEO IN, COMPOSITE or
BASEBAND.
This type of connection provides standard

•

picture quality.

VIDEO OUT

VIDEO IN

English

Connect