Bosch TCA 6001 UC - Manual (Page 26)

26
Eliminating minor malfunctions yourself
Fault Cause Remedial action
Grind unit is not grinding coffee
beans. bandclight up.
Grinder has still not been filled
automatically.
Press the 2 5 button.
The beans are too big or too oily
- they do not slide into the
grinding unit.
Use less oily or smaller beans.
To remove big beans use a
vacuum cleaner.
No hot water or steam
discharge.
Nozzle 13 is blocked. Thoroughly clean nozzle 13.
Froth insufficient or too runny. Sleeve a on nozzle 13 not in
correct position.
Push down sleeve a on nozzle
13.
Unsuitable milk. Use cold semiĆskimmed milk.
Coffee is running a drop
at a time.
Degree of grinding too fine. Select a coarser degree
of grinding.
The beans are too oily. Use less oily beans.
Preground coffee too fine. Use a coarser ground coffee.
To rinse the appliance,
follow the instructions Using
ground espresso/coffee
powder" on page 14, but do not
add coffee powder in the duct.
Coffee has no crema" (layer of
f th)
Unsuitable type of coffee. Change the type of coffee.
froth).
Beans no longer fresh. Use fresh beans.
Degree of grinding not
appropriate for coffee beans.
Optimise degree of grinding.
Grind unit is not grinding coffee
beans.
Beans are not falling into the
grinding unit (too oily).
Gently tap the bean container.
Descaling programe or cleaning
program is not starting.
hflashes 5x on display 3.
System too hot. Set function selector 2 to 0
and drain approx. one cup of
hot water.
Descaling program does not
start
Filter active Remove filter and set water
hardness. Never descale the
appliance with the filter
inserted.