Bosch TCA 6001 UC - Manual (Page 15)

15
q Place an appropriate cup under the nozzle 13.
q Push down sleeve a on nozzle 13.
q Rotate function selector 2 to 0 and fill the cup.
d WARNING d
Risk of scalding!
When the function selector is set
to 0, the nozzle may spurt slightly.
Escaping water is very hot. Do not
touch nozzle or direct at people!
q End the process by rotating the function selector 2
back to z .
It is important for the descaling program that the water
hardness is set correctly.
If external water softeners are used in the domestic
water system or if filtered water is used, select water
hardness 1.
q Ascertain the water hardness with the enclosed
test strip.
q The appliance must be in standby mode, only the
illuminated ring on the button d 4 is lit.
Water
hardness
1
Water
hardness
2
Water
hardness
3
Water
hardness
4
Filter
setting
Preparing hot water
Selecting the water
hardness and inserting
the filter 3.