Philips HTS6500-37 - Manual (Page 2)

3 Enjoy
DVD HOME THEATER SYSTEM HTS6500
Quick Start Guide
Connect
Set up
Enjoy
1
2
3
What’s in the box?
DVD system Remote Control
and 2 batteries
User Manual
Composite video
cable
Need help?
User Manual
See the user manual that cames with your Philips DVD System
Online
Go to www.philips.com/usasupport
Hotline
Call 1-888-PHILIPS (1-888-744-5477) for our operators.
2005 C Philips Consumer Electronics
A Division of Philips Electronics North America Corp
P.O. Box 671539
Marietta, GA 30006-0026
Printed in China
12 NC 3139 245 21773
Start disc playback
A Insert a disc into the disc slot with the disc label
facing up.
EJECT
B Playback will start automatically.
C If the disc menu appears, use TS keys to select an
option in the menu and press PLAY X to start
playback.
z To enjoy the powerful surround sound from the
SonoWave speakers, press SONOWAVE (or
SURR on the remote control) to turn on the multi-
channel surround mode.
D Press STOP x to stop playback.
E Press EJECT Z to remove the disc.
Note When you press PLAY button again,
the playback will resume from where it last
stopped. To start playback from the beginning,
you have to press STOP button two times to
cancel the resume mode, then press PLAY
button.
Playback from the USB
A Insert your USB device into the USB port and wait
for the message to appear on the screen.
B Press DISC/USB to access the contents on your
USB device.
C Press OK to start playback.
D To stop playback, press DISC/USB again to switch
to ‘DISC’ mode. You can unplug your USB device
now.
Playback from the portable
audio/HDD player
A Use the supplied MP3 direct cable to connect the
headphone output jack on your portable audio/
HDD player to the MP3 DIRECT jack.
B Press MP3 DIRECT on the remote control.
C Press PLAY on your portable audio/HDD player to
start playback.
Note You can only control the playback features
using your portable audio/HDD player.
Troubleshooting
For more troubleshooting tips, see the user manual.
No picture.
• Press DISC/USB button on the remote control.
• Check the connection to the TV and ensure the plugs are fi rmly in place.
No sound.
• Check the speaker connections and settings.
• Check the audio connections and press SOURCE button to select the correct input source.
• Press SONOWAVE button (or SURR. on the remote control) to turn on the multi-channel surround output.
The DVD system does not work.
• Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try again.
2 SonoWave speakers
and subwoofer
FM wire antenna AM/MW loop
antenna
MP3 direct cable for
portable audio player
2 sets of wall
mount brackets