Philips HTL4115B-F7 - Manual (Page 9)

7 EN
2
Make sure the TV base is centered on it
and not hanging over any of its edges.
Tip
• If the TV base is too large to put on top of the
Surround Base, place the Surround Base in another
location such as on an open shelf under the TV, but
keep it close to your TV so the audio cable will reach.
You can also mount your TV on the wall above the
Surround Base.
•
If your TV comes with an anti-tip device, install it
according to the manufacturer's instructions and adjust
the tether after placing the TV on top the Surround
Base.
•
If placing the Surround Base in a cabinet or on a shelf,
for optimum audio performance, make sure the font
of the Surround Base as close as possible to the front
edge of the shelf.
•
If placing the Surround Base backed up to a wall, make
sure there is at least a distance of 1 inch between the
wall and the rear of the Surround Base.
4 Connect and set
up
This section helps you connect your Surround
Base to a TV and other devices, and then set it
up.
For information about the basic connections
of your Surround Base and accessories, see the
Quick start guide.
Note
• For identification and supply ratings, see the type plate
at the back or bottom of the product.
•
Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
Connect to TV
Connect your Surround Base to a TV to watch
videos. You can listen to the TV audio through
your Surround Base.
Use the best quality connection available on
your Surround Base and TV.
Connect to TV through HDMI (ARC)
Best quality audio
Your Surround Base supports HDMI with Audio
Return Channel (ARC). If your TV is HDMI
ARC compliant, you can hear the TV audio
through your Surround Base by using a single
HDMI cable.
TV