Philips HTL4115B-F7 - Manual (Page 11)

9 EN
5 Use your
Surround Base
This section helps you use the Surround Base
to play media from a wide range of sources.
Before you start
• Make the necessary connections described
in Quick start guide and User manual.
• Switch the TV to the correct source for
the Surround Base.
Adjust the volume
1
Rotate the power knob or press VOLUME
+/- on remote control to increase or
decrease a volume level.
• To mute sound, press .
• To restore the sound, press again or
press VOLUME +/-.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Press SURR repeatedly to select surround
mode or stereo mode.
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of the Surround Base.
1
Press TREBLE +/- or BASS +/- to change
the treble or bass level.
Night mode
For quiet listening, decrease the volume of loud
sounds when audio is played. Night mode is
only available for Dolby Digital soundtracks.
1
Press NIGHT MODE to turn night mode
on or off.
MP3 player
Connect your MP3 player to play your audio
files or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1
Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your Surround Base.
2
Press AUDIO IN on the remote control.
3
Press the buttons on the MP3 player to
select and play audio files or music.
Play audio through Bluetooth
Through Bluetooth, connect the Surround Base
with your Bluetooth device (such as an iPad,
iPhone, iPod touch, Android phone, or laptop),
and then you can listen to the audio files stored
on the device through your Surround Base.
What you need
• A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 3.0 + EDR.
• The operational range between the
Surround Base and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press Bluetooth on the remote control
to switch the Surround Base to Bluetooth
mode.
» [BT] is displayed.